Showing posts with label IR lasers. Show all posts
Showing posts with label IR lasers. Show all posts

Saturday, May 16, 2015

Flash Sale Today Only at JRH Enterprises

                          FLASH SALE! TODAY ONLY!

Don't delay! Do it now!

912.379.9441    or     912.375.1480 
Nods, lasers, optics, all sorts of great stuff.

Monday, July 1, 2013

Southern Prepper 1 on the DBAL IR Laser

Interesting video that meshes with my thoughts on the matter. Yes they are really expensive. That being said if you can swing it they offer an immeasurable advantage in hours of darkness. If you can afford such a setup it would be prudent to acquire one while they are still available.

Wednesday, June 12, 2013

DBAL I2 Initial Impressions and Night Vision Stuff

Night vision is not cheap. This PVS-14 and DBAL I2 in this picture cost as much as a nice enduro motorcycle or a decent used car. If you can afford it they are an excellent combination. If there is no way you can make that work I would not feel bad about it. You could rock trijicon night sights and surefire lights or consider cheaper Gen 1 night vision. They probably offer 20-25% of the capability (with IR illuminators) at roughly the similar fraction of cost. I can not in good conscience endorse Gen 1 night vision but it probably beats no night vision.

Shown aside the NOD is my DBAL I2 IR/ visible red laser. It showed up a week or so back. The laser also comes with a green vis option for about $200 more. I have heard green lasers can be seen much better/ further by a smart gal named Brigid. Honestly have no use for a vis laser on a fighting rifle so I saw no need to pay more money. For no particular reason put it on a shelf then left it there. Got to fiddling with it a bit today. Will do a brief version of the usual format.

Good: Seems like a quality piece of kit. It is a quality unit with a nice sturdy looking attachment method (though I would zip tie it in place to be safe). A few youtube videos showed that it returns to zero fairly well. I like that it comes in tan. Once the rail is on my rifle will be painted but taking a rattle can to a $800 laser isn't something I like the idea of. So tan is good enough for me.

As to effectiveness of the civilian legal class 1 lasers I can not yet say. A quick net search says dudes are smoking pigs past 200m with DBALs so I think it'll be good enough for me. 

The Bad: It runs on a CR-123 which isn't perfect but most lasers I have seen run on them. That battery is one we stock anyway so it's not a huge deal. Do need to pick up another dozen of them though.

Also getting the battery cap screwed on (to install the battery) was a hassle. Maybe mine is odd or it will break in a bit, however it took me 5 minutes to screw the darn cap on after putting the battery in.

The Ugly: I was under (in hindsight I'm not exactly sure why but I digress) the impression that the vis and IR lasers were slaved. Slaved lasers adjust together so zeroing the vis laser would zero the IR. This is not the case, the lasers definitely adjust separately. This makes for a big hassle in that I have to get out and zero the laser at night. Civilian ranges where you can shoot at night are few and far between. To zero an IR laser I'm going to need a fairly known distance and a very stable rest. A bit more complicated than just confirming a zero with a couple rounds shot at a rock way out in the desert. Granted this will be a one time hassle but it will be a hassle for sure.

In the next few days I will order a rail for the AR. If I wasn't mounting a laser I wouldn't bother with the rail. Well now I am so I need to. Personally I bought the laser first as rail's aren't going anywhere. A troy rail will soon be put on my rifle which will be shortly followed by painting and finally Project Upgrade AR will be finished. [Though I would like to get a BCM lower, for no particular reason, just so everything matches.]

When zeroing lasers there are a couple important things to remember. First the adjustments are opposite iron sights or a scope. Instead of moving the point of impact (the hole the bullet makes AKA POI ) to the point of aim (where your sights point AKA POA) you are moving the laser to meet the impact of the bullet. So adjustments are opposite. Example instead of adjusting right 10 clicks to make the bullet impact (POI) on the bullseye (POA) you are adjusting the laser left 10 clicks to make it meet the strike of the bullet.

There are two fundamental options when zeroing a laser. You can have it zeroed for a given distance or parallel. The plus side of a laser zeroed for a given distance is that it is dead on (perfect POA/POI) for that distance. The downside is that it is off to varying degrees at every other distance. Imagine two chop sticks, one is laid over the other at a gentle angle. The further you get away from the converging point the further the chop sticks get from each other. This options would make sense if for whatever reason you know you will shoot at a given distance. The other option is parallel. Think train tracks. If a laser is an inch above and 3/4's inch to the left of the muzzle it will stay there. So at 10 meters it will be an inch up and 3/4's inch left, same at 50 or 100 meters. This is the method used by our Army, at least in my experience. [Of course bullets do not fly strait. However at the ranges it would matter (past 300m for 5.56) you are probably not going to hit a whole lot at night anyway so I would argue that it doesn't matter.] I would rather have the laser consistently an inch up and 3/4 inch right all the time than perfect at one point and off an unknown distance for the rest.

Anyway that's my initial impression of the DBAL I2.

Tuesday, May 21, 2013

What Did You Do To Prepare This Week?

Organized a bunch of our bug out food.

Ordered a DBAL IR laser. Unfortunately it is a couple/ few weeks back ordered.

Got cash to buy the rail it will go on, either they are out of stock or Troy's website is less than user friendly. Meant to call them today but it didn't happen.

Broke down and ordered a Swack Shack.

Got 100 rounds of 12 gauge #8 shot. Small game loads are something I'm not long enough in shotgun ammo so it is being addressed. Plan to get a case of #4 shot in the next few days.

Made a big grocery store trip to restock a lot of things that have been used up.

Been putting more consideration into eating well and exercising.

What did you do to prepare this week?

Thursday, April 11, 2013

Project AR Upgrade: Troy Rail and DBAL I2?

So I am getting ready to complete Project AR Upgrade. Funding is about 70% in place and pending a transaction tomorrow will be complete. Here is what I am looking at.

Rail: Troy Battle Rail Delta. I want to keep the standard gas block/ front sight for a few reasons. First cuz I've got it and the gun is zeroed, second cuz I'm cheap and third they are IMO more rugged than any folding type sight that would go onto a rail. The minimalist type rail seems like the way to go giving me all the benefits of a free floating barrel but an easier and cheaper install. Honestly I wouldn't bother except wanting a solid place (to hold a zero) to mount an IR laser.

IR Laser: Looking at a DBAL I2. Would go with the red vis laser because I don't use the vis anyway.

Pending that sale and a little bit more research I should be able to pull the trigger this weekend or early next week. If you have any experience with this stuff or comparable products please let me know your thoughts.

Thursday, February 7, 2013

M-4/ AR-15 Optics and Civilian Legal IR Lasers

I am looking at the Leupold Mark AR 1.5-4x20. The Firearms Blog reviewed it awhile back and it seems like the ticket. If anybody has PERSONAL EXPERIENCES with this scope I would really appreciate their thoughts.

Also I have been looking at civilian legal IR lasers. I am familiar and comfortable with the lasers we use on the .mil side but the civilian offerings are something new to me. Have heard of the DBAL but they have multiple models and the same company makes a few other lasers. From reading the descriptions I can't tell the difference and the prices vary widely. Of course I would like to keep cost down but would rather take the hard right over the easy wrong. In any case if you have experience with multiple models or know a place that does a good comparison of readily available civilian legal lasers that would be a big help.

Thanks in advance,

Related Posts Plugin for WordPress, Blogger...

Popular Posts